
Need caulk to match your Benjamin Moore paint? Denver Color Caulk custom-tints caulk to the paint color you choose. Start with the color name and number, choose your caulk, and order it online.
We tint Sherwin-Williams 950A Siliconized Acrylic Latex Caulk and SherMAX Urethanized Elastomeric Sealant. Benjamin Moore is the paint color reference for your order. The caulk is custom-tinted by Denver Color Caulk.
Shop caulk matched to Benjamin Moore colors.
A bead of caulk can stand out along painted baseboards, crown molding, window trim, or door trim, even when the joint is neat. Choosing a color that coordinates with the surrounding paint helps that line blend into the finished project.
The right starting point is the surface you want to match. At a joint between a white baseboard and a gray wall, decide whether you want the caulk to follow the trim color or the wall color. If both surfaces use the same paint color, use that color as your reference.
We offer two custom-tinted options:
Choose the formula for the joint as well as the color. For interior or exterior work, check the product instructions for the surfaces you are sealing, joint size, movement, and exposure to weather or water. A color match does not determine whether a sealant is suitable for a particular application.
Find the exact Benjamin Moore color name and number on your paint can, color chip, or paint order. For example, Revere Pewter is HC-172. Use both the name and number to avoid confusion between similar shades.
If you are matching an existing painted surface, confirm which paint was used. A photograph or an on-screen swatch is a useful starting point, but screens and lighting can change how a color appears. Keep the paint color information with your project notes for future orders.
Note whether the paint is flat, eggshell, satin, or semi-gloss. Caulk and paint can reflect light differently, so matching the color does not necessarily match the sheen or texture.
Look at the actual joint, including both adjoining surfaces. Trim profiles, shadows, and nearby colors can all affect how noticeable the caulk line appears. Choose the surface you want the bead to blend with before ordering.
Open our Benjamin Moore caulk colors ordering page and select the paint color you need. Choose Standard 950A or Premium SherMAX for your order.
Use Benjamin Moore paint color information as the reference for the match. Denver Color Caulk handles the custom tinting and supplies your caulk.
Measure the joints you need to seal and check the selected product's coverage guidance. The number of tubes you need depends on the length, width, and depth of the bead. Allow for your test bead and normal application waste.
Before you place the order, double-check the color name, color number, caulk option, and quantity. If your project uses different colors on walls and trim, make sure each tube is assigned to the correct area.
When your caulk arrives, apply a small test bead on a suitable scrap sample or an inconspicuous part of the intended surface. Let it dry fully according to the product instructions before judging the color.
Compare the dried caulk with the painted surface in daylight and under the lighting the space normally uses. Check it from a normal viewing distance as well as close up. This is the time to decide whether the appearance works for your project.
These Benjamin Moore paint colors are useful starting points for a coordinated finish. Order by the specific color name and number, and check the dried caulk against your own painted surface.
White Dove is a soft white. For a caulk line alongside White Dove-painted trim or molding, use OC-17 as your color reference. Small differences between whites can be noticeable where the two materials meet.
Simply White is a bright white with a touch of warmth. If your trim or walls are painted Simply White, specify OC-117. Check the dried bead under your room's lighting, especially beside another shade of white.
Revere Pewter is a versatile neutral that works with warm and cool colors. Use HC-172 when matching a caulk line to a Revere Pewter-painted surface. At the edge of white trim, decide which of the two colors you want to carry through the joint.
Hale Navy is a deep navy blue. A color-coordinated caulk line can help keep a dark painted surface visually consistent. Use HC-154 for the color reference, and pay attention to the dried bead's sheen against the paint.
Kendall Charcoal is a dark charcoal gray. Specify HC-166 when ordering caulk to coordinate with this paint color. A small dried test is especially useful where the joint catches direct light.
Color is only part of the result. Surface preparation and a controlled bead make a difference, too.
For application and safety guidance, use the instructions for the actual 950A or SherMAX sealant you ordered.
Have your paint color name and number ready. Choose Standard 950A or Premium SherMAX, select your quantity, and let Denver Color Caulk handle the custom tinting.